2018/01/10

符合欧美环保医疗使用的胶水3104胶

符合欧美环保医疗使用的胶水3104胶

符合欧美环保医疗使用的胶水3104胶:

本文来自:汉高乐泰胶水(中国)有限公司 Henkel Loctite官网 www.loctite.net/c1190.html

  TechnicalDataSheet

    LOCTITE® 3104™

    April-2007PRODUCTDESCRIPTION    50 mW/cm², measured @400nm    <5LOCTITE®  3104™  provides   the  following  product

characteristics:    Electrodelesssystem, Hbulb:

Technology    Acrylic    50 mW/cm², measured @365nm,    <5ChemicalType    Acrylatedurethane    Electrodelesssystem, Dbulb:

    LMS    50 mW/cm², measured @365nm,    <5Appearance(uncured)  Transparentliquid

Components    One component - requiresnomixing

Viscosity    Low    UVFixtureTime,Glassmicroscopeslides,seconds:

Cure    Ultraviolet(UV)/visiblelight    ®

CureBenefit    Production-highspeedcuring    Blacklight, Zeta 7500:

    6 mW/cm², measured @365nm,    ≤15LMSApplication    Bonding

KeySubstrates    PVC andPolycarbonate    DepthofCure

Flexibility    Enhances load bearing & shock    Curedepthdependsbothon externalfactorsincludingthetype

    absorbingcharacteristicsofthebond    oflightsource,lightintensityandexposuretimeandon internal

    area.

    ®    factorsincludingcompositionoftheadhesive.ThefollowingLOCTITE  3104™ isprimarilydesignedfor bondingrigidor    graphshows theeffect of light source, light intensity andflexiblePVCtopolycarbonate.Thesecharacteristicsenable    ®

easyassemblyofcomponentswithclosefittingtolerances(i.e.    exposuretimeondepthofcureforLOCTITE 3104™.joiningpolycarbonatetoflexiblePVCtubing).Theproducthas    CuringSystem:MetalHalide

shownexcellent adhesion to a widevariety of substrates    12

includingglass,manyplasticsandmostmetals.    10

    m

TYPICALPROPERTIESOFUNCUREDMATERIAL    m

    ,   8

 SpecificGravity@ 25°C    1.13    re

    /cm²

    u    mW

 Viscosity,Brookfield -RVT, 25°C,mPa·s(cP):    50

    C  6

  Spindle1,speed20rpm    90 to210LMS    f

 RefractiveIndex,ASTMD542    1.48    o

    h  4

    t

 FlashPoint-SeeMSDS    p

    e    cm²

    W/

    0m

    3

    D  2

TYPICALCURINGPERFORMANCE

LOCTITE® 3104™canbecuredby exposureto UV and/or

    00    10    20    30    40    50    60visiblelightofsufficientintensity.Surfacecureisenhancedby    Time, seconds

exposuretoUV lightinthe 220to260nmrange.Curerateand

ultimate depth of cure depend on light intensity, spectral    CuringSystem: Electrodeless,Dbulb

distribution of the light source, exposure time and light    12

transmittanceofthesubstratethroughwhichthelightmust

pass.    m10

    m

StressCracking    ,   8

    e    ²

    r    cm

    W/

    u    00m

Liquidadhesive isappliedtoapolycarbonatebar6.4cmby13    1

    C  6

mmby3mmwhich isthen flexedtoinduceaknownstress

    f

level.    o

    h    ²

    t   4    /cm

 StressCracking,ASTMD3929,minutes:    W

    m

    p    50

  7 N/mm²stressonbar    >15    e

    D  2

  12N/mm²stressonbar    3 to4

FixtureTime    00    10    20    30    40    50    60UV fixture time is defined as the light exposure time    Time, seconds

 required to developa shearstrengthof0.1N/mm².

  UVFixtureTime,PolycarbonatetoPVC,seconds:

   Zeta®7400lightsource,MetalHalidebulb (Indium):

    30 mW/cm², measured @400nm    <5

    50 mW/cm²,  measured @400nm    <5

   Electrodelesssystem, Vbulb:

    TDSLOCTITE®3104™,  April-2007CuringSystem: Electrodeless,Hbulb    Polycarbonate toSteel:

    12    Initial    N/mm²   3.19

    (psi)       (463)

    10    Aged@49°C/condensedhumidityfor       N/mm²   2.64m    ²

    m    300 hours    (psi)       (383)m    /c

    W

  ,    m

    8    0    Aged@49°C/condensedhumidityfor       N/mm²   3.13e    0

    1

  r    500 hours    (psi)       (454)u

  C  6

  f    Polycarbonate toGlass:

  o    Initial    N/mm²   3.25h    ²

  t   4    cm

    W/

    0m    (psi)       (471)p    5

  e    Aged@49°C/condensedhumidityfor       N/mm²   3.74D  2

    300 hours    (psi)       (543)

    0    Aged@49°C/condensedhumidityfor       N/mm²   3.68

    0    10    20    30    40    50    60    500 hours    (psi)       (534)

    Time, seconds    Polycarbonate toPhenolic:

    Initial    N/mm²   3.3TYPICALPROPERTIESOFCUREDMATERIAL    (psi)       (479)Cured@30mW/cm², measured @365nm,for80 seconds using    Aged@49°C/condensedhumidityfor       N/mm²   6.62a metalhalide lightsource    300 hours    (psi)       (525)PhysicalProperties:    Aged@49°C/condensedhumidityfor       N/mm²   4.19

   TensileStrength,atbreak,ISO527-3    N/mm²   19    500 hours    (psi)       (608)

    (psi)       (2,755)    Polycarbonate toPolycarbonate:

   TensileModulus,ISO527-3    N/mm²   738    Initial    N/mm²   21.8

    (psi)       (107,000)    (psi)       (3,155)

   Elongation,atbreak,ISO527-3,%    50    Aged@49°C/condensedhumidityfor       N/mm²   13.2

   ShoreHardness, ISO868,Durometer D    69    300 hours    (psi)       (1,910)

   RefractiveIndex,ASTMD542    1.51    Aged@49°C/condensedhumidityfor       N/mm²   9.85

   WaterAbsorption,ISO62,%:    500 hours    (psi)       (1,428)

    2 hoursinboilingwater    3    Polycarbonate toEpoxyglass:

  Electrical Properties:    Initial    N/mm²   3.66

   DielectricConstant/DissipationFactor,IEC60250:    (psi)       (530)

    0.1-kHz    3.888/0.0445    Aged@49°C/condensedhumidityfor       N/mm²   3.92

    1-kHz    3.78/0.0149    300 hours    (psi)       (568)

    1,000-kHz    3.61/0.0254    Aged@49°C/condensedhumidityfor       N/mm²   2.63

    500 hours    (psi)       (382)

   VolumeResistivity,IEC60093,Ω·cm    0.92×1015

    15    Polycarbonate toPVC:

   SurfaceResistivity,IEC60093,Ω    0.97×10    Initial    N/mm²   9.78

   Dielectric Breakdown Strength, IEC 60243-1,34    (psi)       (1,418)

   kV/mm    Aged@49°C/condensedhumidityfor       N/mm²   11.4TYPICALPERFORMANCEOFCUREDMATERIAL    300 hours    (psi)       (1,647)AdhesiveProperties    Aged@49°C/condensedhumidityfor       N/mm²   8.17

    500 hours    (psi)       (1,185)Cured@30mW/cm², measured @365nm,for 80 seconds using    Polycarbonate toABS:

 a metalhalide lightsource    Initial    N/mm²   22.0LapShearStrength,ISO4587:    (psi)       (3,184)

   Polycarbonate  toAluminum  (etched):    Aged@49°C/condensedhumidityfor       N/mm²   13.3

    Initial    N/mm²   4.98    300 hours    (psi)       (1,926)

    (psi)       (722)    Aged@49°C/condensedhumidityfor       N/mm²   9.62

    Aged@49°C/condensedhumidityfor       N/mm²   4.14    500 hours    (psi)       (1,395)

    300 hours    (psi)       (600)    Polycarbonate toAcrylic:

    Aged@49°C/condensedhumidityfor       N/mm²   3.72    Initial    N/mm²   8.66

    500 hours    (psi)       (539)    (psi)       (1,256)

   Polycarbonate toAluminum (asreceived):    Aged@49°C/condensedhumidityfor       N/mm²   8.3

    Initial    N/mm²   3.61    300 hours    (psi)       (1,204)

    (psi)       (523)    Aged@49°C/condensedhumidityfor       N/mm²   5.64

    Aged@49°C/condensedhumidityfor       N/mm²   0.7    500 hours    (psi)       (818)

    300 hours    (psi)       (101)

    Aged@49°C/condensedhumidityfor       N/mm²   0.84

    500 hours    (psi)       (122)

HenkelLoctiteAmericas    HenkelLoctiteEurope    HenkelLoctiteAsiaPacific+860.571.5100    +49.89.9268.0    +81.45.758.1810

    Forthemostdirectaccesstolocalsalesandtechnicalsupportvisit:www.loctite.com

    TDSLOCTITE®3104™,  April-2007

   Polycarbonate toNylon:    2. Theproductshouldbedispensedfromapplicatorswith

    Initial    N/mm²   2.74    blackfeedlines.

    (psi)       (397)    3. Forbestperformancebondsurfacesshouldbecleanand

    Aged@49°C/condensedhumidityfor       N/mm²   3.2    freefromgrease.

    300 hours    (psi)       (464)    4. Curerateisdependentonlampintensity,distancefrom

    Aged@49°C/condensedhumidityfor       N/mm²   4.8    lightsource,depthofcureneededorbondlinegapand

    500 hours    (psi)       (696)    lighttransmittance ofthesubstrate throughwhich the

   Polycarbonate toPolybutylene    radiationmustpass.

   Terephthalate(PBT):    5. Cooling should be provided for temperature sensitive

    Initial    N/mm²   6.85    substratessuchasthermoplastics.

    (psi)       (993)    6. Crystallineandsemi-crystallinethermoplasticsshouldbe

    Aged@49°C/condensedhumidityfor       N/mm²   6.88    checkedforriskofstresscrackingwhenexposedtoliquid

    300 hours    (psi)       (997)    adhesive.

    Aged@49°C/condensedhumidityfor       N/mm²   7.54    7. Excessadhesivecanbewipedawaywith organicsolvent.

    500 hours    (psi)       (1,094)    8. Bondsshouldbeallowedtocoolbeforesubjecting toany

    serviceloads.

TYPICALENVIRONMENTAL RESISTANCE    LoctiteMaterialSpecificationLMS

 Cured@30mW/cm², measured @365nm,for80 seconds    LMSdatedOctober-02,2000. TestreportsforeachbatchareLapShearStrength,ISO4587:    availablefortheindicatedproperties. LMStestreportsinclude

   Polycarbonate:    selected QC test parameters considered appropriate to

    0.5mmgap    specificationsforcustomeruse. Additionally,comprehensive

    controls  are in place to assure product quality and

    concsistrednincyt. Sptercialchusteonmkelr spueacliitfic.ationrequirementsmayHeatAging

Agedattemperatureindicatedandtested@22°C

 LapShearStrength,ISO4587:    Storage

  Polycarbonate:    Storeproductintheunopenedcontainer inadry location.

   %ofinitialstrengthretained    Storageinformationmaybeindicatedontheproductcontainer

   Aged@71°Cfor170 hours    100    labeling.

   Aged@71°Cfor340 hours    100    OptimalStorage: 8°Cto21°C. Storagebelow 8°Cor

   Aged@93°Cfor170 hours    100    greaterthan28°Ccanadverselyaffectproductproperties.

   Aged@93°Cfor340 hours    100    Materialremovedfromcontainersmaybecontaminatedduring

    use. Donotreturnproducttotheoriginalcontainer.  Henkel

    Corporationcannotassumeresponsibilityfor productwhichChemical/SolventResistance    hasbeencontaminatedorstoredunderconditionsotherthanAgedunderconditionsindicatedandtested @22°C.    thosepreviouslyindicated.Ifadditionalinformationisrequired,

    %ofinitialstrength    please contact your local Technical Service Center orEnvironment    °C    2h    24h    170h    CustomerServiceRepresentative.

Boilingwater    100    100    -----------   -----------    Conversions

Waterimmersion    49   ------------   -----------    100    (°Cx1.8)+32=°F

Waterimmersion    87   ------------   -----------    35    kV/mmx25.4=V/mil

Isopropanol    22   ------------    100    -----------    mm/25.4=inches

Heat/humidity    38   ------------  -------------    100    µm/25.4=mil

    Nx0.225=lb

    N/mmx5.71=lb/in

GENERALINFORMATION    N/mm²x145=psi

Thisproductisnotrecommendedforuseinpureoxygen    MPax145=psi

and/oroxygenrichsystemsandshouldnotbeselectedas   N·m x 8.851= lb·in

asealantforchlorineorotherstrongoxidizingmaterials.    N·mx0.738=lb·ft

    N·mm x0.142=oz·in

Forsafehandlinginformationonthisproduct,consultthe   mPa·s=cP

MaterialSafetyDataSheet(MSDS).

    Note

Directionsforuse    Thedatacontainedhereinarefurnishedforinformationonly1. Thisproductislight sensitive; exposuretodaylight,UV    and are believed to be reliable.  We cannot assume

    lightandartificiallightingshouldbekepttoaminimum    responsibilityfortheresultsobtainedby othersoverwhose

    duringstorageandhandling.    methodswehavenocontrol. Itistheuser'sresponsibilityto

    determinesuitabilityfortheuser'spurposeofanyproduction

    methodsmentionedhereinandtoadoptsuchprecautionsasHenkelLoctiteAmericas    HenkelLoctiteEurope    HenkelLoctiteAsiaPacific+860.571.5100    +49.89.9268.0    +86.20.3623.0506

    Forthemostdirectaccesstolocalsalesandtechnicalsupportvisit:www.loctite.net

    TDSLOCTITE®3104™,  April-2007maybeadvisablefortheprotectionofpropertyandofpersons

againstanyhazardsthatmaybeinvolvedinthehandlingand

usethereof. Inlight of theforegoing,Henkel Corporation

specificallydisclaimsallwarrantiesexpressedorimplied,

inacrltuicdinlagrwparraonstie,saroifingmerfcrhantabilityororuseoffitnessHfonrkeal

Corporation’sproducts. Henkel Corporationspecifically

disclaims any liability for consequential or incidental

damagesofanykind,includinglostprofits. Thediscussion

hereinof various processes or compositions is not tobe

interpreted as  representation that they are free from

dominationofpatentsownedbyothersorasalicenseunder

any Henkel  Corporation patents that may cover such

processes or compositions.  We recommend that each

pros,puescitivethuisertteastahisapgroipos. edhaipplicoatiocntbeforeerepetitive

byoneormoreUnitedStatesor foreignpatents orpatent

applications.

Trademarkusage

Exceptasotherwisenoted,alltrademarksinthisdocument

are  trademarks of  Henkel Corporation in the U.S. and

elsewhere.   ® denotesa trademarkregisteredintheU.S.

PatentandTrademarkOffice.

Forreuse

Reference1.1

HenkelLoctiteAmericas    HenkelLoctiteEurope    HenkelLoctiteAsiaPacific+860.571.5100    +49.89.9268.0    +86.20.3623.0506

    Forthemostdirectaccesstolocalsalesandtechnicalsupportvisit:www.loctite.net

上一页:管漏水、管漏油、管漏汽、管漏、怎么办?