2018/01/11

进口金属修补胶水德国品牌

进口金属修补胶水德国品牌:

本文来自:汉高乐泰胶水(中国)有限公司 Henkel Loctite官网 www.loctite.net/c1197.html

Product name:LOCTITE 98853

Materials:LOCTITE

Availability::In stock

Date: 2016-08-12

Editor: NORTH GROUP

Email To: sale@henkel-loctits.com

Product Detail:

More about :LOCTITE 98853

Loctite 98853 glue anti-seize compounds

 

Product Description of Loctite 98853

Loctite magic metal glue stick 98853 Pressure Seal Bars 113.4 g

Metal Magic glue stick rod is filled with steel powder epoxy adhesive, after kneading by hand to fill gaps or holes to plugging for 3 minutes, Fixture time is 10 minutes. It can be drilled, tapped, painted after curing paint. Suitable for tanks and pipes leak repair emergency seal can be used in the steel material pressure is less than 0.3MPa conditions plugging. You can fill the weld flat; small crack casting repair. For oversized bolt holes to fill. NSF61 standards. It is a steel reinforced Putty, can leak appeared on the vessel steel, iron, aluminum and other metal materials, pipes and some of the parts, cracks, blisters, defects, breakage, damage, etc. filled with adhesive. In addition, it can quickly produce, reproduce parts, models, model, repair peeling thread, sturdy after fixed, seals and various other forms of mounting bolts.

 

Mainly for the repair of cast iron and stainless steel parts, repair of casting defects, fill cracks, holes. Production of nuts, screws, repair worn threads; for metal equipment, tools, pipes, appliances and automotive body repair; does not shrink after curing, never rust; color after curing gray, metallic luster.

 

Before use, shall be repaired at around rust, dust, grease and other floating objects clean. Remove plastic tube colloid, the amount of cut desired, and the colloid core to sheath material of two different colors by hand to fully blend into one color (about 1 to 2 minutes) until smooth. Its hard compacted cement to mend and try to squeeze into the holes and cracks. After mixing the adhesive quickly reacted, 3 to 5 minutes after the start of colloidal slight fever cured, after 10-20 minutes, it will be very hard. Before curing clay-like form so that it does not drip when used, not flowing, easy to use. Winter cold areas should colloid and surface to be repaired properly heated to room temperature or slightly above.

 

Color: dark gray

Shear strength: ≥3.45LMS

Pressure shear strength (N / mm ^ 2) ISO 10123: Steel pins and ring: 82.7

Tensile strength: 17.2

Maximum temperature: 121 (℃)

Curing time: 10

Content: 4oz

Coating area (cm ^ 2 / 6mm thick / tube): 45

Aluminum (N / mm ^ 2) (acid etching) 0.125mm gap: 4.8

上一页:乐泰金属快速修补堵漏胶水LOCTITE 98853