返回浏览

2018/03/28

乐泰LOCTITE UK U-09LV和U-09FL有什么区别？

乐泰LOCTITE UK U-09LV和U-09FL有什么区别：

本文来自：汉高乐泰胶水（中国）有限公司 Henkel Loctite官网 www.loctite.net/c1298.html

以下是乐泰LOCTITE UK U-09LV环氧树脂胶水参数及产品资料报告，大家可以在这里面查找您想要的结果和产品的内容性能，U-09FL的资料在上一页，用户可以相对应的对比，参考www.loctite.net/c1297.html

Product Description Sheet

LOCTITE® UK U-09LV

Known as

Hysol Product U-09LV®

October 2015

PRODUCT DESCRIPTION

LOCTITE® UK U-09LV is a low-viscosity, industrial grade

urethane adhesive. Once mixed, the two-component urethane

cures at room temperature to form an ultra-clear, highly flexible

bond line, which provides excellent peel strength.

TYPICAL APPLICATIONS

Ideal for bonding polycarbonate, and a variety of other plastics,

as well as glass, and metal. Suited for applications requiring a

clear, non-yellowing bond line.

PROPERTIES OF UNCURED MATERIAL

Resin Typical

Value Range

Chpeemircaal cTey pe Plolyirs loicyiadn ate Curing Properties

Specific Gravity @ 25°C 1.1 1.0 to 1.2 (@ 25C unless noted) Typical ValueViscosity @ 25C, mPa.s (cP) 920 Working Life, minutes 10Flash Point (TCC), C See SDS Tack Free time, hours 3 to 24Hardener Typical TYPICAL PROPERTIES OF CURED MATERIAL

(@ 25C unless noted)

Value Range Physical Properties Typical ValueChemical Type Polyol Dielectric Strength STM 733, Volts/Mil 986Appearance Clear Liquid Tensile Strength STM 708, psi 2752Specific Gravity @ 25°C 1.00 0.95 to 1.15 Tensile Elongation STM 708, % 149Viscosity @ 25C, mPa.s (cP) 1,050 600 to 2,000 Hardness STM 707, Shore D 47Flash Point (TCC), C See SDS Glass Transition Temperature STM 767, Tg, C -3

CTE pre Tg, STM 767 101ppm

CTE post Tg, STM 767 213ppmAMipxturrae e Tlytrpi call Vara lue PERFORMANCE OF CURED MATERIAL

Specific Gravity @ 25°C 1.0 - 1.2 Shear Strength vs Substrate

Mix Ratio (R:H) by Weight 100 to 91

by Volume 1 to 1 Substrate (Substrates cured for 5 days @ 22C) Typical Value

Lapshear STM 700 N/mm2 (psi)

Grit-Blasted Steel 8 1145

Aluminum (Acid Etched, 3 to 9 mil gap) 5.5 795

Aluminum (Anodized) 3.5 505

Stainless Steel 3.3 475

Polycarbonate 4.0 580TYPICAL CURING PERFORMANCE Nylon 1.7 240

Wood (Pine) 4.0 575

Lap Shear STM 700 (Acid Etched, 3 to 9 mil gap) N/mm2 (psi)Cure speed Substrate cured for 3 hrs at 65°C 2.3 335The graph below shows the shear strength developed over Substrate cured for 24 hrs at 65°C 4.0 580time on acid etched aluminum lap shears with an average Substrate cured for 72 hrs at 65°C 7.1 1030bondline gap of 3 to 9 mils and tested according to STM 700. Substrate cured for 1 week at 65°C 7.6 1100

Block Shear STM 726, 5 days at RT N/mm2 (psi)

PVC 9.9 1430

ABS 1.8 255

Epoxy 18 2600

Acrylic 3.6 515 Product Description Sheet

LOCTITE® UK U-09LV

Known as

Hysol Product U-09LV®

October 2015

TYPICAL ENVIRONMENTAL RESISTANCE Chemical / Solvent Resistance

Hot Strength Cured for 5 days at 22°C on steel with no induced gap, agedTest procedure : STM 700 under conditions indicated and tested at 22°C.

Substrate: Acid etched aluminum

Bondline gap, mils: 3 to 9 Solvent Temp. % Initial Strength retained atCure procedure: 12 hours at 65C & 4 hours at 22C 500 hr 1000 hr

Air 87C 135 140

Motor Oil (10W-30) 87C 260 220

Unleaded Gasoline 87C 0 0

Water/Glycol (50%/50%) 87C 10 0

Salt/Fog ASTM B-117 22C 0 0

95% Relative Humidity 38C 25 30

Condensing Humidity 49C 15 14

Water 22C 14 21

Acetone 22C 0 0

Isopropyl Alcohol 22C 0 0

GENERAL INFORMATION

This product is not recommended for use in pure oxygen

and/or oxygen rich systems and should not be selected as

a sealant for chlorine or other strong oxidizing materials.

For safe handling information on this product, consult the

Material Safety Data Sheet, (MSDS).

Directions for use

1. For high strength structural bonds, removal of surface

contaminates such as paint, oxide films, oils, dust, mold

release agents and all other surface contaminates.

2. Use gloves to minimize skin contact. DO NOT use solvents

for cleaning hands.

3. Dual Cartridges: To use simply insert the cartridge into the

application gun and start the plunger into the cylinders

using light pressure on the trigger. Next, remove the

cartridge cap and expel a small amount of adhesive to be

sure both sides are flowing evenly and freely. If automatic

mixing of resin and hardener is desired, attach the mixing

nozzle to the end of the cartridge and begin dispensing the

adhesive. For hand mixing, expel the desired amount of

the adhesive and mix thoroughly. Mix approximately 15

seconds after uniform color is obtained. Bulk Containers:

Mix thoroughly by weight or volume in the proportions

specified in Properties of Uncured Material section. Mix

vigorously approximately 15 seconds after uniform color is

obtained.

4. For maximum bond strength apply adhesive evenly to both

surfaces to be joined.

5. Application to the substrates should be made within 10

minutes. Larger quantities and/or higher temperatures will

reduce this working time.

Product Description Sheet

LOCTITE® UK U-09LV

Known as

Hysol Product U-09LV®

October 2015

6. Join the adhesive coated surfaces and allow to cure at specifically disclaims any liability for consequential or incidental25C (77F) for 24 hours for high strength. Heat up to damages of any kind, including lost profits. The discussion herein of93C (200F), will speed curing. various processes or compositions is not to be interpreted as

representation that they are free from domination of patents owned by7. Keep parts from moving during cure. Contact pressure is others or as a license under any Henkel Corporation patents that maynecessary. Maximum shear strength is obtained with a 3-9 cover such processes or compositions. We recommend that eachmil bond line. proes, puescitiv et huis er tteas t hsisa pgruoipdo.s eTdh iasp pplicdatiot n baef ore reopveetitiv eby one or

more United States or foreign patents or patent applications.8. Excess uncured adhesive can be cleaned up with ketone In case products are delivered by Henkel Belgium NV, Henkeltype solvents. Electronic Materials NV, Henkel Nederland BV, Henkel TechnologiesStorage France SAS and Henkel France SA please additionally note theProduct shall be ideally stored in a cool, dry location in following:

unopened containers at a temperature between 8C to 28C In case Henkel would be nevertheless held liable, on whatever legal(46F to 82F) unless otherwise labeled. Optimal storage is at ground, Henkel’s liability will in no event exceed the amount of the

concerned delivery.

the lower half of this temperature range. To prevent In case products are delivered by Henkel Colombiana, S.A.S. thecontamination of unused product, do not return any material to following disclaimer is applicable:

its original container. For further specific shelf life information, The information provided in this Technical Data Sheet (TDS) includingcontact your local Technical Service Center. the recommendations for use and application of the product are based

on our knowledge and experience of the product as at the date of thisData Ranges TDS. Henkel is not liable for the suitability of our product for theThe data contained herein may be reported as a typical value production processes and conditions in respect of which you use them,and/or range. Values are based on actual test data and are as well as the intended applications and results. We stronglyverified on a periodic basis. recommend that you carry out your own prior trials to confirm such

suitability of our product.

Note Any liability in respect of the information in the Technical Data Sheet orThe information provided in this Technical Data Sheet (TDS) including any other written or oral recommendation(s) regarding the concernedthe recommendations for use and application of the product are based product is excluded, except if otherwise explicitly agreed and except inon our knowledge and experience of the product as at the date of this relation to death or personal injury caused by our negligence and anyTDS. The product can have a variety of different applications as well as liability under any applicable mandatory product liability law.differing application and working conditions in your environment that are

beyond our control. Henkel is, therefore, not liable for the suitability of Trademark usage

our product for the production processes and conditions in respect of Except as otherwise noted, all trademarks in this document arewhich you use them, as well as the intended applications and results. trademarks of Henkel Corporation in the U.S. and elsewhere. ®We strongly recommend that you carry out your own prior trials to denotes a trademark registered in the U.S. Patent and Trademarkconfirm such suitability of our product. Office.

Any liability in respect of the information in the Technical Data Sheet or

any other written or oral recommendation(s) regarding the concerned

product is excluded, except if otherwise explicitly agreed and except in

relation to death or personal injury caused by our negligence and any

liability under any applicable mandatory product liability law.

In case products are delivered by Henkel Corporation, Resin

Technology Group, Inc., or Henkel Canada, Inc.the following disclaimer

is applicable:

The data contained herein are furnished for information only and are

believed to be reliable. We cannot assume responsibility for the results

obtained by others over whose methods we have no control. It is the

user's responsibility to determine suitability for the user's purpose of